P300 Bowed Rollers
Applications: crease removal - slit separation - web spreading |
| |
|
|
| Type P300 bowed rollers are constructed with a premanant bowed axle. Fitting over the axle are a series of rotating bearing housings and a rubber outer sleeve. The plane of the bow can be altered to adjust the amount of spreading force. |
|
As the web travels over the arc of the bow, the material is stretched thus removing only wrinkles. If the web has been slit into numerous sections the ribbons diverge until arrested by the next path roller.
Optimum Position |
|
Recommended
Wrap Angle |
|
| Plastic Film |
50° - 70° |
| Paper/Board up to 150 gsm |
20° - 40° |
| Paper/board over 150 gsm |
15° - 20° |
| Textiles and Nonwovens |
50° - 100° |
|
| Part No |
Axle ø |
Roller ø |
Max Face |
Max Speed |
| P300-16-38 |
19 |
38 |
650 |
220 mpm |
| P300-19-38 |
19 |
38 |
650 |
220 mpm |
| P300-25-50 |
25 |
50 |
1200 |
275 mpm |
| P300-30-70 |
30 |
70 |
1800 |
400 mpm |
| P300-40-90 |
40 |
90 |
2300 |
500 mpm |
| P300-45-105 |
45 |
105 |
3000 |
575 mpm |
| P300-55-130 |
55 |
130 |
3500 |
700 mpm |
| P300-60-155 |
60 |
155 |
4000 |
800 mpm |
|
| When using light materials or the web tension is insufficient to rotate the bowed roller a drive pulley must be used. If possible drive the bowed roller at approximately 0.5% faster than the web speed. |
